Machined Type Bearing AssemblyMechanical press-fit
Typically, the bearings can be used to pressure the assembly with the installation, assembly, slowly push the mandrel should be used to prohibit the direct hit to avoid deformation of the bearing, the assembly should ensure that the seat before the hole smooth surface without foreign body. Refrigeration assembly By liquid nitrogen or dry ice compared with cold press-fit assembly with mechanical press-fit method is more effective, then the standard freezing temperature of -40 ℃ ~ -70 ℃, freezing time is generally 1 hour or more, according to the specific needs of parts of the wall thick and with tolerance. Shrinkage of the bearing can be calculated according to the following companies: ΔD=D×α×ΔT ΔD:OD Diameter shrinkage D:OD Bearing outer diameter α:Linear expansion coefficient(1/105K) ΔT:Temperature difference |